Ibis’ Mojo HD started its life as a longer travel, more rowdy-loving brethren of the company’s popular mojo in 2010 and it was by all accounts a smashing success. What’s not to love when a long travel bike could climb efficiently, turn around to shred downhill with authority and just look so darn good?
Nine years and four iterations later, Ibis is ready to bring its latest creation, the HD5 for all to enjoy. It’s still made out of carbon fiber and with the curvy lines that we’ve since grew accustomed to, but with updated geometries that reflect the current trend of longer and slacker school of thought.
Here is a quick infographic on what’s good on the new 27.5, 1x specific HD5:
The suspension on the HD5 has also been reworked as well. It’s still got the DW-link that the Mojo is known for, with updates to the lower linkage to the ones first seen on the Ripmo, but to go with it is what Ibis calls Traction Tuned Suspension that takes advantage of the DW-link where by design doesn’t need a whole lot of compression damping. The HD5 will have 153mm of rear travel and is optimized with a 170mm fork up front.
The new tune is conceptually similar to the custom Roxy tune Ibis has been spec’ing on the smaller frames, but it’s further refined using a new data acquisition system from Motion Instrument for the past two years. What the rider gets in return, according to Ibis, is “it allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.” Besides being standard equipment on the HD5, the custom-tuned shocks will be rolling out across Ibis’ lineup going forward
The Mojo HD5 is backed with a seven year frame warranty and lifetime replacement on bushings. The HD 5 is available today with two colors to choose from (Brown Pow and Charcoal) as a frame with Fox DPX2 starting at $2,999 while the complete bike will start at $4,399 with SRAM NX Eagle.
It is available worldwide starting today. More info here if you want to take a deep dive into the bike.
Sh*t happens. Botched landings, driving your car into the garage with the bike still on the roof rack… the list goes on.
Now here’s some good news. As long you are the original owner of your ENVE Composites products… bars, hoops, all of them, the newly announced lifetime, no-questions-asked incident protection has got you covered.
As radical as that elevated chain stay might look, I am excited the new Allied Cycle Work’s ABLE still has that 420mm chain stay for most frame sizes with enough room to accommodate 700x47c/650×55 and 700x43c/650×47 rear tires.
But before you call it just an updated Allroad with a new chain stay, its geometry has been reworked with a slightly taller stack, a 71° head tube with a 66mm trail for the increasingly more technical gravel, or just your hard all-day gnar grind. Still handmade in Little Rock, Arkansas and I love the music video!
First came the G23 and G27 wheels for the gravel-oriented. Now ENVE is upping the ante further with the new G-series handlebar and fork designed to meet the unique demands of off-road drop bar riding.
The new $550, 520-gram flat-mount compatible fork comes with a 50mm rake and a massive 50mm (😍) tire clearance. The 12mm thru-axle fork is also fender compatible, of course.
As for the bar, besides the 80mm reach and 120mm drop, the G-series bar has a 12mm outward flare at the drops for extra stability, plus a wider clamp area to accommodate accessories such as lights… or controversial items *cough* aero extensions. The $350, electronic-shifting friendly bar is available for $350 in four sizes ranging from 42-48cm, weighing 246-281 grams depending on size. Both the fork and handlebar are available now.
Feedback Sports' Ominum Trainer all packed and ready go to. Photo: Stephen Lam/ element.ly
Beeline had one of their mobile bike shop on hand to help setting up the bikes, such as installing pedals for me because I forgot to bring a 8mm hex wrench, I blame that on my mini-tool. Photo: Stephen Lam/ element.ly
FSA's SLK crankset with their new super compact chainring aiming for the adventure/gravel crowd. Photo: Stephen Lam/ element.ly
DMT's slick RS1 featuring a single BOA dial to tighten/loosen the skeleton skin top. Photo: Stephen Lam/ element.ly
Kenda's Flintridge Pro gravel tire, now available in 35c and 40c Photo: Stephen Lam/ element.ly
SCICON AeroComfort Road 3.0 TSA bike travel bag, the choice of ProTour teams when they have to ship their bikes to races. Photo: Stephen Lam/ element.ly
What really makes SCICON AeroComfort Road 3.0 bag so unique is its wheeled caddy which secures your bike in the bag without the need of removing the handlebar and seatpost. All you need is to take the wheels off, mount the bike on the caddy and put the bag over it. Yay for being able to keep your dialed bike fit intact. Photo: Stephen Lam/ element.ly
Variety of pedal stack for your Speedplay Syzr pedals. Photo: Stephen Lam/ element.ly
... As well as customizable axle lengths. Photo: Stephen Lam/ element.ly
This must be the first time where I had a presention done in the dark. Photo: Stephen Lam/element.ly
The Joder riding shirt from Colorado's Panache Cyclewear Photo:Stephen Lam/ element.ly
Panache's Joder riding shirt features a full zipper, but perhaps the biggest standout are its two lower front pockets for small items such as gels, bars, phone, etc. Photo:Stephen Lam/ element.ly
For the first time ever, the annual spring PressCamp was all about road and by that I mean any bikes that come with a drop handlebar.
Here are the 9 coolest products I saw from the two days of back-to-back meetings.
Ridley Helium SLX
Prized for its comfort and the lack of grams, the Helium has long been a proven staple in Ridley’s line up and has had its share of refinement over the years. The newest iteration, the Helium SLX, is its lightest yet and continues to live up to this featherweight chemical element. With a new blend of Ridley’s 60T carbon and a new lay up schedule, Ridley was about to bring the frame down to 750g for a medium size while increasing its stiffness about 15% more than the previous model.
As for tire clearances, Ridley recommends a max 25mm for tires and 28mm for rim widths. In other words, most of the new wide aero wheels on the market will play nicely with the Helium SLX. Cable routings are now fully internal for both mechanical and electronic shifting groups for a cleaner appearance.
The sub-300 gram fork now features a full monocoque straight blade design and that’s counting its stainless steel inserts at the dropout for better alignment and protection. I briefly test rode the $5,800 version with full Shimano Dura-Ace 9100 mechanicals and the initial review was quite positive. The bike begs to be climbed, moves so eagerly with every pedal stroke and steers precisely around twisty descents. The geometry gravitates towards the aggressive racing stance as it was made for the ProTours, but I found the Helium to be comfortable, not squishy. Stay tuned for a long-term review soon.
Raleigh Stuntman ($2,499)
Inspired by the character Colt Seavers (by actor Lee Majors) in the 1981 television series The Fall Guy, the Stuntman is tailor-made for those who spend their days in the office planning their next bike camping epic. The gorgeously-painted frame is made out of double-butted Reynolds 631 steel for comfort and durability, but with modernized specs such as a 142×12 rear axle, a tapered headtube, and plenty of tire clearance (more on that later). In fact, the frame feels so solid we reckon it’ll be pretty difficult to break in half unless you decide to enter Redbull Rampage with one.
We think the components choice is pretty well fitting for what the bike is intended for as well: A no-nonsense full SRAM Rival 1X11 drivetrain with a 40T front ring for propulsion along with matching hydraulic discs to slow things down when called for. And when the road (or groad) gets a bit more gnarly, you could use the mechanical dropper post with 65-80mm of travel from a bar mounted remote on Raleigh’s own branded drop-bar with 16 degree flare in its drops. Interestingly enough, the Stuntman went with a full aluminum fork for better strength which also keeps the price low. Did I mention there are mounts for racks and fenders? So yes, all this bike missing is the stuntman himself.
The wheel build is an interesting proposition too: 50C (!) Clement X’PLOR MSO Tubeless rubbers mounted to sealed Novatec hubs laced to 28mm wide Weinmann U28TL tubeless rims with 32 14/15g butted stainless spokes, brass nipples. It’s nowhere as exotic as say, a pair of Zipp 454 NSWs, but again, you don’t go off-road on your 4-Runner with HRE P201s with Pirelli P Zeros, do you?
FSA WE hybrid-wireless drivetrain ($TBA)
Over the years, new companies with new drivetrain ideas have popped up, getting some flare about how disruptive their products will be, and eventually flame out in one way or another… Let’s face it, the barrier to enter the drivetrain business is not only risky, requiring a lot more than money and engineering, but it’s also been dominated by the big three (Shimano, SRAM, Campagnolo). That said, if there’s a company that could challenge the big three, FSA might just be it. You see, FSA has been cumulating their manufacturing know how for about 25 years making headsets, handlebars, cranksets, stems, wheels… essentially everything except a drivetrain group. Yet after years of development rumors and the occasional spy pics, they felt they finally have something to offer: The WE hybrid-electronic groupset.
But what the heck is a hybrid-wireless system anyway? Like is it wired AND wireless at the same time? The short answer, as confusing as it might be, is yes. The shifters are wireless utilizing ANT+ to securely communicate with the derailleurs while the derailleurs are wired to be powered from the battery within the seatpost. This is a solution where FSA engineers felt was more reliable and longer-lasting (claimed 4,000 to 6,000km per charge). We’ll take their word for the time being before our long-term test but the samples they had at PressCamp looked very close to the production model with very clean lines and completely functional for rides. The shifters felt comfortable in my hands and the FSA will be offering carbon lever blades in two different lengths (6mm difference) for better ergonomics. What’s more, a companion app will be available for users to further customize their system for things such as shift speed and button function.
Now, the shifting operation is of course, different than what’s already out there. The WE utilizes a rocker switch with different textures to differentiate up and down shift.
It works as advertised, being able to do both single and multiple shifts when called for. The switch will take a bit of time to get used to since the buttons are relatively close to each other, but that could be matter of getting used to a system like the first time you use a Mac. We’ll see whether the WE will be as popular as Di2, eTAP, or EPS, but the competition just heated up a bit more.
ABUS YADD-I Urban Helmet ($79.99-89.99)
Originally beginning as an aero-helmet concept, the YADD-I is part of ABUS’ introduction to the US helmet market. Yes, ABUS is probably better known for their badass locks in the states but the German company has been producing helmets since 1992. At first glance the YADD-I might look like a modernized skater helmet, but beneath the shell are air channels (ABUS named it Forced Air Cooling Technology) to suck cold air in to keep your head cool. There’s even a detachable soft visor that works just like your favorite cycling cap. Instead of using a teethed or geared retention system, ABUS uses a simple but brilliant Soft Tune System where it simply uses an elastic band to automatically adjust to the user’s head. Nine colors will be available starting this April, and that’s not counting the special edition with the flag of the City Chicago on top. Nothing against Chicago but I’d be very happy if ABUS released one with the California Bear on top.
Kenda Valkyrie ($69.95)
Admittably, Kenda is better known for their line of mountain bike tires, but the Taiwanese tire maker’s newest top road offering, the Valkyrie, aims to change that as a result of three years of development at their new R&D center in Cleveland, Ohio (Fun fact: Kenda is an official sponsor of the Cleveland Cavaliers). With the Valkryie, Kenda claims a low rolling resistance and an increased wet/dry with the use of their third generation R3C rubber compound while the new KA armor takes care of puncture protection in lieu of the more common but heavier kevlar belt. At a claimed 178g for 23c, 182g for 25c, 235g for 28c and 265g for 30c, the Valkyrie sure reads like a high-performance racing tire. The 700x23c and 25c are available now, with the 28c and 30c available around later this spring. If you’re a tubular guy, the Valkyrie has you covered too, offering 22c and 24c wrapped on a 300tpi casing, (which will cost a bit more than the clincher version). The tubeless version is also in development.
If you’ve been on a local race team for a while, I am sure you know something about ordering, actually, let’s not get ahead of ourselves here, picking the right apparel maker for your next team kit. Fit parties, back and forth, and I won’t even go into the actual design of the jersey. There’s a reason that very position on my team is appropriately named the kit bitch.
But Giordana is here to streamline that process and is opening up their line of speciality apparel for customization. Your team can now order custom water-shedding G-Shield jerseys/bibs for wet days and the lightweight Sahara jerseys/bibs for hot summer days, while having access to their customized Giordana elite FR-C line of clothing if you are so inclined. The order minimum is 10 and the program includes Giordana’s own in house designer to help with the design, from a finished template to ideas still on napkins, Giordana will be able to help and all garments will be made in the same factory in Italy as the rest of the Giordana’s offerings with an average 6-8 week turnaround from start to finish.
HIA Velo/Allied Cycle Works ALFA ($2,700 frame/fork)
Perhaps the most exciting news from PressCamp and for a good reason. Think about this for a second: For $2,700, you get a sub-800 gram frame (56cm) in six sizes plus two head tube heights per size to choose from, plus lifetime warranty and factory repair service. Sounds good right? The frame is made entirely in the U.S. (Little Rock, Arkansas, to be exact) starting from the pre-preg itself. Speaking of their composites, the ALFA includes the exclusive use of Innegra fiber within its layout to have better impact resistance and helps keep the frame together shall the frame fail for safety, and just so it won’t snap into a million pieces when you stupidly crash at your next criterium in category forever 4.
For a complete bike, HIA is planning to offer a complete build starting at $4,000 with full Ultegra mechanical. 4k is a decent amount of money for a bike but a very competitive price if you’re already looking at custom U.S. made bikes.
No small details were overlooked, as evident by the metal badge here in the downtube that doubled as an access port if you choose to run a mechanical groupset by simply swapping it.
Also, if you think the paint job on the ALFA is bitchin’, that’s because it is in fact gorgeous. The in-house paint department, formerly known as SoCal’s Cyclart, definitely knows a thing or two when it comes to paint. HIA is hoping to introduce new paint finishes every week because 1: They can, and 2: Showing up to a group ride on a bike with the same bike same paint job as someone else is just not fresh.
Infinity Bike Seat ($170-$295)
I was skeptical when I first saw the seats from Infinity. If there’s a museum of awkward looking saddles, the Infinity is probably going to be there. Afterall, where is my bottom supposed to go? So I gave the Infinity a shot during the presentation and surprise surprise, nothing catastrophic happened contrary to conventional wisdom. The saddle is finicky to test and to review upon, much less in a short demonstration. But the Infinity saddle felt different than other split saddles that I’ve tried. Perhaps it’s the next big thing after the latest clipped nose saddle rage?
But seriously, though, don’t judge a seat by its (lack of) cover.
Cipollini MCM custom($3,872 frameset)
Almost a 180 degree difference from the Alfa aforementioned above, the Cipollini MCM is the Italian racer-turned-maker’s first made-to-order fame. For $3,872, you’ll get a slippery-looking carbon aero bike with custom geometry and custom finishes on a frame loaded with all the latest standards such as a tapered headtube, a BB86 bottom bracket, and mechanical/electronic shifting compatibilities. What’s more, the MCM will accommodate sizes from 44cm all the way to 63cm with tire clearance for 28C tires across the board.
While we’re on the MCM, it’s also worth mentioning the MCM2 that I feel is even more compelling. The MCM2 is currently still in the development phase and wasn’t shown at PressCamp, but it is in essence a MCM with an integrated electric motor. The current prototype is said to be around 10kg/22lbs but we should have more info on the bike soon. Hate eBikes all you want but I think the MCM2 is one of the hottest eBikes I’ve seen this year and it actually looks like a normal bike.
Don’t even think about bringing the MCM2 to your local races, though, that’s just wrong.