The Bontrager TLR Flash Charger floor pump. The silver barrel is the pump and the bigger, black cylinder is the air chamber for tubeless. Photo: Stephen Lam/ Element.ly
We wish the PSI gauge have more markers for more precise reading. Photo: Stephen Lam/ Element.ly
Flip the red lever down to charge the chamber for tubeless. Flip it again to release the air, or use it just as a normal pump. Photo: Stephen Lam/ Element.ly
The pump head is plastic but it worked liked a champ during out test, gripping both schrader and presta value with ease. Photo: Stephen Lam/ Element.ly
The red lever and the bleed valve. Photo: Stephen Lam/ Element.ly
For the longest time, owning any tubeless tire almost meant you’d be better off owning a compressor too in order to help it seat properly. A regular floor pump/co2 sometimes worked but a compressor gives you that massive volume of compressed air with just a squeeze of the nozzle lever.
I reluctantly got a small Craftsman compressor when I converted my mountain bikes to tubeless. I found the compressor to be awfully loud as if I was mowing the lawn inside my garage. Good headphones helped but that’s just not very ideal … Can you imagine what it’d be like having a compressor in your two bedroom Brooklyn apartment with squeaky wooden floors? Yeah, not a good idea.
But the Bontrager TLR Flash Charger could very well replace the need for a compressor.
Just Flip the Switch
Built with two chambers, the TLR Flash Charger is part pump, part (manual) compressor. After flipping the unmistakable red switch, you pump air into the giant chamber. To use the stored air to seat a tubeless tire, all you’ll have to do is flip the switch and watch the air blast into the tire.
It’s that simple.
It takes about 42 strokes to get the chamber charged to the red indicator. Which, at about 160psi, was plenty enough to seat our 26, 29, and 700c tires with extra.
Pump it Up … Eventually
The other function of the pump is, well, to inflate your tires. Here I feel the TLR Flash Charger comes up a bit short. It’s not that it doesn’t fill the tires with air just like every other pump. But instead of just connecting it to the tire and pumping away, the TLR Flash Charger needs to be equalized (with the tire) first before one can start the actual inflation (Huh?).
Think of it this way, say the tire already has 100PSI and you want to check the pressure. The pump will pull about 50 psi from the tire for the equalization to happen. It’s not a big deal if the tire is flat as a pancake, but it was annoying having the need to do the extra work. So plan ahead if you’re in a time crunch.
I would also love to see a more precise pressure gauge. The numbers on the existing top-mount (thank you) gauge were easy to read. But I was left scratching my head at the fact that it only showed increments every 20psi with no markers in between (other than 30PSI). So what if I wanted to pump it to 90PSI? Doesn’t that defeat the purpose of having a built-in bleed value?
This won’t be an issue if you measure your tire pressure in bars instead of psi but come on, for $120 you would think that’s a no brainer.
So Close
So is this pump for you? That depends. The TLR Flash Charger works beautifully in setting up all sorts of tubeless. It’s as good as any compressor in that regard albeit without all the noise and need for electricity — which is great if you’re living in a place with sensitive neighbors/housemates/kids, or don’t have the room for an electric compressor.
I really liked the concept, and it would be perfect to the be only pump you should own if Trek can do away with the air equalization.
